Technical data

S 10-U · S 10-O (not illustrated)

Small storage water heaters 5 and 10 litres

Storage water heater S 5

Up to 5 litres of hot water at the selected temperature are delivered

by the small storage water heater S 5-U at a single point of use.

To ensure that the unit is not subjected to mains water pressure it

requires special open-outlet tapware only.

· Non-pressure 5 litres storage water heater for one outlet with

open-outlet (vented) tap

· Temperature control from appr. 35 °C to 85 °C with energy saving

range and economy setting

· Polypropylene inner container with high-quality thermal insulation

· Temperature lock to 38 °C, 55 °C or 65 °C

· Resettable safety temperature cutout to avoid risk of running dry

· Performance: S 5-U (undersink model): 2.0 kW 230 V

S 5-0 (oversink model): 2.0 kW 230 V

· Dimensions (H × W × D): 38 × 26 × 23 cm

Storage water heater S 10

With its 10-litre storage capacity this water heater is able to fulfil

even increased requirements for hot water at the kitchen sink.

Thanks to the durable copper tank vented and unvented installation

is possible in conjunction with a safety relieve valve (not supplied).

· Unvented 10 litre storage heater to supply single or multiple

outlets

· Heavy gauge inner container, does not require an anode or regular

inspection

· Temperature controller from approx. 35 °C to 80 °C

· 3-stage temperature lock of the selector range

· Performance: S 10-U (undersink unit): 2.2 kW 230 V

S 10-O (oversink unit): 2.2 kW 230 V

· Dimensions (H × W × D): 45 × 30 × 29 cm

S 5-U · S 5-O (not illustrated)