Technical data

Optimum hygiene and central top-up heating

Fresh water station FWX

Conventional tanks can favour the multiplication of legionella

bacteria. Therefore large tanks regularly heat up to over 60 °C, and

that increases the energy use. This becomes obsolete with the fresh

water station. Potable water is heated directly as it flows through

the heat exchanger. That protects people‘s health as well as saving

energy.

· Fresh water station for combining with solar hot water store

· Hygienic heating of fresh water in a flow-through process

· Stainless-steel plate heat exchanger housed in a sheet steel case,

complete with high-performance pump and power control

· Four cut-off ball valves and

“ hot water connection

· Performance FWX:

Approx. 30 kW (approx. 3.5 – 25 l/min 30 °C – 60 °C)

· Dimensions (H × W × D): 46.5 × 23 × 19.5 cm

FWX

Fresh water station FWX SOLARTRONIC

One particular innovation is the new SOLARTRONIC

fresh water

station with an integral electronic instantaneous water heater for

central top-up heating. This system ensures hot water is always

on tap when it‘s needed, and at the required temperature, even at

night and on cloudy days.

· Fresh water station with integrated auxiliary, instantaneous water

heater for heating preheated water in combination with solar hot

water store

· Hygienic heating of fresh water in a flow-through process

· Stainless-steel plate heat exchanger housed in a sheet steel case,

complete with high-performance pump, power control and elec-

tronic instantaneous water heater

· Three cut-off ball valves and

“ hot water connection

· Performance FWX SOLARTRONIC

: 27 kW 400 V (approx.

2.5 – 11.5 l/min 30 °C – 60 °C)

· Dimensions: (H x W x D): 46.5 × 23 × 26 cm

FWX SOLARTRONIC