Technical data

Practical installation below the kitchen sink

Electronic instantaneous water heater

CDX 11-U BASITRONIC

Although this instantaneous water heater is not equipped with

any operating elements the integrated electronics still reliably do

their job. They control the output power according to the flow rate

and inlet temperature. In daily use the temperature setting is set as

accustomed via the tap.

· Electronically controlled, under-sink instantaneous water heater in

a compact design

· Automatically adapts output performance to the flow rate and

inlet temperature

· Maximum outlet temperature factory set to 50 °C

(internally adjustable)

· Easy installation under the kitchen sink due to small dimensions

and outside

“ water connections for installation directly to the

tap connecting hose

· Supplied with power cable for 3-phase power supply for easy

installation without opening the appliance

· Performance: 11 kW 400 V (approx. 4.8 l / min 45 °C)

· Dimensions (H × W × D): 29.4 × 18 × 11 cm

CDX 11-U BASITRONIC

CBH 7 · CBH 11

Instantaneous water heater CBH 7 / 11

The instantaneous water heater CBH 11 has an integrated load

shedding circuit as standard. That makes it possible to power the

unit and an electro-mechanical cooker from a shared 400 V electrical

connection (cooker connection box).

· Hydraulically controlled under-sink instantaneous water heater

· Instantaneous water heater automatically activates full heating power

· The integrated load shedding circuit and the second connection

terminal facilitate making a connection between the electro-

mechanical cooker and the cooker connection box, if this is

operated via a 3/N/PE ~400 V connection

· Performance:

CBH 7: 6.9 kW 400 V (approx. 3.5 l / min ∆t 22 K)

CBH 11: 11 kW 400 V (approx. 5.0 l / min ∆t 31 K)

· Dimensions (H × W × D): 33 × 21 × 9 cm