Technical data

CRX 6 · CRX 7 · CRX 9

Robust and versatile

Electronic instantaneous water heater CRX 6..9

Thanks to its compact design and tubular heating system this elec-

tronic instantaneous water heater is suitable for a wide range of

applications in certain countries. The desired outlet temperature is

set on the control panel. The electronics regulate the heat output to

the desired temperature, and in doing so ensure energy-saving use.

· Electronically controlled instantaneous water heaters in a compact

design for single or multipoint applications

· Control panel and LED display to select the desired temperature

between 35 °C and 55 °C

· Variable water connection for wall-mounted or flush-mounted

installation

· Performance:

CRX 6: 6.6 kW 230 V (approx. 3.5 l / min 35 °C to 55 °C)

CRX 7: 7.2 kW 220 V (approx. 4.0 l / min 35 °C to 55 °C)

CRX 9: 8.8 kW 230 V (approx. 5.0 l / min 35 °C to 55 °C)

· Dimensions (H × W × D): 33 × 21 × 9 cm

CRH 6 · CRH 9

Instantaneous water heater CRH 6 / 9

This standard instantaneous water heater turns on automatically

to full power as soon as sufficient water flows through the robust

tubular heating system. The outlet temperature depends on the

respective amount of water and the inlet temperature. Equipped

with concealed water connections the compact case is suitable for

both wall mounted and the optically more appealing flush-mounted

installation variations.

· Hydraulically controlled instantaneous water heaters in a compact

design

· Instantaneous water heater automatically activates full heating

power

· Variable water connection for wall-mounted or flush-mounted

installation

· Performance: CRH 6: 6.6 kW 230 V (approx. 3.8 l / min ∆t 25 K)

CRH 9: 8.8 kW 230 V (approx. 5.0 l / min ∆t 25 K)

· Dimensions (H × W × D): 33 × 21 × 9 cm