Technical data

11
Instantaneous water heater MH 3..7
The small, vented instantaneous water heater MH is the right choice
if you wish to replace conventional vented storage water heaters
used in conjunction with open outlet taps. This economic appliance
is quickly installed and eliminates costly standby heat losses at each
basin or sink.
· Mini-sized, hydraulically controlled under-sink instantaneous water
heater to supply a single point of use
· The heating element is activated automatically as soon as water
begins to flow through the unit
· Bare wire technology IES
®
achieves maximum efficiency plus the
fastest possible heat up time
· Non-pressure water heater for one outlet with open-outlet
(vented) tap
· Supplied completely with special tap nozzle with integrated flow
rate regulator for fitting in tap threads M22 / M24
· Performance: MH 3: 3.5 kW 230 V (approx. 2.0 l / min ∆t 25 K)
MH 4: 4.4 kW 230 V (approx. 2.5 l / min ∆t 25 K)
MH 6: 5.7 kW 230 V (approx. 3.3 l / min ∆t 25 K)
MH 7: 6.5 kW 400 V (approx. 3.7 l / min ∆t 25 K)
· Dimensions (H × W × D): 13 × 18.5 × 8 cm
Quick and easy to install
MH 3 · MH 4 · MH 6 · MH 7
SNM EKAEKMENDAEN
CLAGE taps for open-outlet instant water heaters
Based on many years of experience CLAGE is able to offer a wide selection of high-quality fittings for use in open outlet installations with small
instantaneous water heaters. Our range includes single lever, touch-free sensor taps and standard mixers.