Installation Guide

802257UK - G4 Boiling (& ambient) residential installation instructions - Aug 2015 - V2.01 Page 27 of 32
Installation instructions
4.6 Hydrotap
®
G4 boiling ambient and mixer tap combinations (for Arc / Cube, also refer to
the tube kit assembly instructions supplied with the tap head).
Arc / Cube
Elite Classic
Classic
Arc
Cube
+
Note The braided hoses and connection tubes supplied with the HydroTap
®
G4 inc. cold inlet and booster
CANNOT be lengthened.
POWER
CABLE
USB
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT BYPASS
OUT
RED
CLEAR
BRAIDED
HydroTap
Mixer
Connections
AMBI-
ENT
OUT
BLUE
Clearance
envelope
280mm
50mm50mm
535mm
Tee piece and
Restrictaow valve
COLD isolation valve
(Not supplied)
Male to male
adaptor to T-Piece
(supplied)
Note Ambient mains water braided
hose length is 750mm. Electrical
power cable length is 1800mm.
Position the Command-Centre
TM
according to the hose and cable
lengths supplied.
Booster
option
Booster option
Note All silicon tubes / plastic pipes
must be cut to size. They must have
a constant fall back to the
Command-Centre
TM