Installation Guide

Page 26 of 32 802257K - G4 Boiling (& ambient) residential installation instructions - Aug 2015 - V2.01
Installation instructions
Note The braided hose and connection tubes supplied with the HydroTap
®
G4 inc. cold inlet and booster
CANNOT be lengthened.
RED
CLEAR
BRAIDED
POWER
CABLE
USB
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT
BYPASS
OUT
HydroTap
Mixer
Connections
Clearance
envelope
280mm
50mm
50mm
535mm
T-piece and
Restrictaow valve
COLD isolation valve
(Not supplied)
Male to male
adaptor to T-Piece
(supplied)
Note Ambient mains water braided
hose length is 750mm. Electrical
power cable length is 1800mm.
Position the Command-Centre
TM
according to the hose and cable
lengths supplied.
Booster option
Booster
option
Note All silicon tubes / plastic
pipes must be cut to size. They
must have a constant fall
back to the
Command-Centre
TM
4.5 Hydrotap
®
G4 boiling and mixer tap combinations (for Arc / Cube, also refer to the tube kit
assembly instructions supplied with the tap head).
Arc / Cube
Elite Classic
Classic
Arc
Cube
+