Installation Guide

Page 24 of 32 802257K - G4 Boiling (& ambient) residential installation instructions - Aug 2015 - V2.01
4.3 Hydrotap
®
G4 boiling models (for Arc / Cube, also refer to the tube kit assembly instructions supplied
with the tap head).
Installation instructions
Arc / Cube
Elite Classic
Note The braided hoses and connection tubes supplied with the HydroTap
®
G4 inc. cold inlet CANNOT be
lengthened.
Not required for standard boiling models.
POWER
CABLE
USB
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT BYPASS
OUT
RED
CLEAR
BRAIDED
Clearance
envelope
280mm
50mm
50mm
535mm
COLD isolation valve
(not supplied)
Note Ambient mains
water braided hose
length is 750mm.
Electrical power cable
length is 1800mm.
Position the
Command-Centre
TM
according to the hose
and cable lengths
supplied.
Booster
option
Note All silicon tubes / plastic pipes
must be cut to size. They must have
a constant fall back to the
Command-Centre
TM