Installation Guide

Page 18 of 32 802257K - G4 Boiling (& ambient) residential installation instructions - Aug 2015 - V2.01

Installation instructions

2.3 Alternative arrangement

• For high use applications where the cupboard space temperature is near 35

C or higher, a vent kit

(SP91545) can be used to provide further ventilation by convection.

When installing air flow vents , the following tools will be required

• Jigsaw and drill.

• Keyhole or wall board saw.

Note The vent kit has to be installed in a way that allows air to be drawn in from the bottom of the cupboard

and expelled through the top of the cupboard. The outlet vent should be towards the top of the door (position

A1) or side of the cupboard (position A2).

(Where possible air inlet vent and the air outlet vent should be positioned at opposite ends of the same

cupboard space).

Vent cut-out details

A1 or A2 Air outlet vent

B Air inlet vent