Installation Guide

Page 24 of 36 802253 - HydroTap BC, BCHA-AV, AIO, Installation Instructions - June 2015 - V2.01
Typical Cut out procedure for
B
Ventilation
Cutout deatils
Air inlet vent
1. Mark out and cut the air inlet and door outlet holes as shown
2. Ensure the air inlet vent and air outlet vent are positioned at opposite ends
of the same cupboard space.
3. Fit the inlet vent, as shown and secure with 5 screws
4. If required, fit the outlet vent, as shown in the hottest part (top) of the
cupboard and secure with 4 screws
B
D