ZIP HydroTap G4 ® User Manual • • • • • Tap Operation..................(Pages 3-11) LCD Screen & Menu .......(Pages 12-26) Maintenance.................... (Pages 26-29) Home Menu Icons............(Page 30) Contact details.................(Page 32) Date of Installation............./......../......... BCS Residential Affix Model Number Label Here 802006 For safe keeping store this book in the inside door pocket 802006 - HT-BCS; BCSH A-AV User Manual - 09.2016 - v3.
Notes Page 2 of 32 802006 - HT-BCS; BCSH A-AV User Manual - 09.2016 - v3.
. Tap Safety The safety lock feature is provided to prevent boiling water flowing if the hot lever is inadvertently operated. This function can be activated and deactivated from either the Tap or from the touch screen display (Located on the unit in the cupboard). To set the tap safety setting: (Classic; Elite & All-In-One taps) 1. Press [MENU] button for main A menu. 2. Press [Setting] button. 3. Press [Safety] button. 4.
3. Tap functions Elite Tap: Boiling Button The Elite tap uses touch sensitive controls, to dispense Boiling, Chilled and Sparkling water. Chilled Button Safety Lock When operating the tap, ensure the touch surface is dry as moisture may interfere with the sensor touch control. The safety lock can be controlled from either the tap or from the touch screen display in the same way as the Classic tap (See page 3) All-In-One Tap: The top of the All-In-One tap is operated the same as a Classic HydroTap.
Tap functions HydroTap Arc/Cube: 3. On power up, wait 30secs. for the unit to calibrate itself. Tapping the select button will allow the choice of Boiling (RED) with safety, Chilled (BLUE) or Sparkling (WHITE) water mode. The Arc/Cube control may be rotated in a forward or reverse direction to dispense Boiling or Chilled water. The rotary control is spring loaded in the anticlockwise direction and when released, Rotary control will return to the OFF position.
3. Tap operation To dispense chilled water: Classic Tap Press or pull lever HydroTap Classic and All-In-One taps: Depressing the “Blue” lever allows the dispensing of chilled water. Pulling forward the Blue lever allows the tap to operate in a “no-touch” mode. Water will flow from between 5 and 15 seconds (This is user adjustable). To reset, return the handle to the “Off” position and repeat the step. The lever has to be manually returned to the “Off” position.
3. Tap operation To dispense boiling water: (With the safety OFF) HydroTap Classic: Depressing the Red lever allows the dispensing of boiling water. Pulling forward the Red lever allows the tap to operate in a “no-touch” mode. Water will flow from between 5 and 15 seconds (This is user adjustable). To reset, return the handle to the “Off” position and repeat the step. The lever has to be manually returned to the “Off” position.
Tap operation To dispense Sparkling water: Operate both levers together HydroTap Classic and All-In-One taps: Depressing both the ‘Red’ and the ‘Blue’ levers allows the HydroTap Classic dispensing of Sparkling water. Pulling forward both levers allows the tap to operate in a in a “no-touch” mode. Water will flow from between 5 and 15 seconds (This is user adjustable). To reset, return the handles to the “Off” position and repeat the step. The levers have to be manually returned to the “Off” position.
Tap lights Red Boiling Water Light: (All) Red Lights Blue Lights On all the time: This indicates that the boiling water is ready. Flashing slowly: This indicates that the boiling water is below the desired temperature. Wait for the light to stop flashing before dispensing water. The flashing light will typically occur after switching on, or coming out of sleep mode.
Filter Lights Filter light Filter light: Classic; Elite & AIO Filter Light Off: This indicates the filter is operating within its normal specified lifespan. Filter Change light flashing slowly: The light will flash slowly when the filter is due for replacement and the LCD will show “Filter Change”. Refer to “Replacing the filter” in section ‘C’ of this document. Classic Tap Filter Light Turn filter light OFF: (All models) Refer to “Filter Reset” in section ‘C’ of this document.
Safety Sensor Calibration (lever models) Light intensity varies from site to site, therefore it is recommended that a re-calibration be performed at the time of the installation. All direct natural sun light must be shaded from the HydroTap, during the calibration. This can be achieved by closing any nearby curtains, blinds, etc. or by shading the tap with a dark cloth. 1. With the unit in Normal operating mode and with the safety enabled 2. 3. Turn the power OFF 4. 5. 6. Turn ON the power 7.
3LCD Screen Zip HydroTap introduces a ‘TOUCH’ screen for easy setup and operation adjustment. (See page 30 for Home Menu Icons) Other possible messages in status window: Status** Information Notes Safety OFF Product is in normal operation mode - Safety ON Safety lock is activated Refer to section G - safety System Fault Product has one or more system faults Refer to section B Sleep Mode System is in sleep mode. Boiling Refer to section water or hot water is not available.
3LCD Main Menu Language Screen Menu Sub Menu • English • Product Info Information Sub Menu Options Section • System Faults • Event Log A • Product serial no.
LCD Screen operation - Section A A Set Language Language options will be available in some overseas markets LCD Screen operation - Section B B System Information In this section, you can find your product serial number , check system fault messages or view the event logs of your product. 1. Press the [MENU] button for main menu. 2. Press the [Info] button to view the product serial number and other key information. 1. Press [Product Info] to view the product information. 2.
LCD Screen operation - Section B 1. Press [Energy] to view Energy information. 2. The Total energy consumption will be displayed, or 3. Select reset to view the energy used for that period. 4. Press [<=] for the previous menu or press [Home] to return to the home screen. LCD Screen operation - Section C C Install Once your Zip HydroTap G4 unit has been installed, Go to Install menu to configure the system settings for your product.
LCD Screen operation - Section C OPEN Position CLOSED Position ON OFF The Zip HydroTap allows the user to adjust the filter life and to edit the filter usage. (See filter details on Page 22 ). 2. - Filter Reset After replacing the filter, the counters should be reset 1. Press the [MENU] button for main menu. 2. Press the [Install] button. 3. Press the [Filter Reset] button. 4. To set the filter life or edit filter usage, refer to section G- Filter. 3.
LCD Screen operation - Section C 4. - Booster This function should only be considered when a Booster unit is installed. 1. Press the [MENU] button for main menu. 2. Press the [Install] button. 3. Press the [Booster] button. 4. If a Booster is installed, select YES to enable the Booster. 5. Dispense boiling water for 30 secs and check the outlet hose from the Booster is warm. 6. If no Booster is installed, select NO. Note: Failing to make the correct selection for ‘Booster’ will effect product performance.
LCD Screen operation - Section C 7. - Advanced options Pump anti cavitation mode: This feature sends two electric pulses every 5minutes to the pump. This prevents the build up of air bubbles inside the pump and ensures an even flow of hot water at the tap. Power Pulsing mode: This is a default set point control feature which ensures the hot water is maintained as close as possible to the set point. This is achieved by applying a closer tolerance to the set point temperature range.
LCD Screen operation - Section D D Service This section is reserved for service technicians only Note: In Australia call a licensed electrician, plumber,or Zip office on 1800-638-633, for assistance, service, spare parts, or enquiries. 3. E LCD Screen operation - Section E Security The Zip HydroTap G4 allows the appliance coordinator to set up a password to protect against users changing the preferred system settings.
LCD Screen operation - Section F F Communication - WiFi (Select models) This section allows the user to use WiFi to monitor the product remotely. 1. From the Home screen Press [Menu]. Then [Comm’s] 2. Enter your 4 digit password to access the WiFi set up. 3. Follow the set up instructions supplied with the WiFi unit To disable the WiFi setup 1. Press [WiFi setup] 2. In the next screen Press [Disable] 3. Press [<=] button for the previous menu 3.
Set Date / Time G4 HydroTap Set Date/Time Screen 1. Press the [MENU] button for main menu. 2. Press the [Setting] button. 3. Press the [Date/Time] button. 4. Choose 12 hour mode or 24 hour mode by pressing the square button. The selected mode will be displayed in dark grey colour with a tick box on the right. 5. Press [NEXT] button to set time. 1. Select individually the hour, minutes and day and adjust using the up and down arrows. 2.
3. LCD Screen operation - Section G Filter Zip HydroTap G4 allows the user to adjust filter life and edit filter usage. Note: The filter life may be set as a function of Litres used, or in months from the filter change. When the first of these functions is reached (i.e. Litres or months expired), the filter warning light will be illuminated on the tap. Either of these functions may be disabled (See below). To edit the filter life: 1. Press the [MENU] button for main menu. 2. Press the [Setting] button. 3.
3. LCD Screen operation - Section G Energy Modes This mode allows the HydroTap to enter into Energy Saving mode. There are two options available: ‘Sleep’ mode and ‘ON/OFF’ mode. In Sleep Mode the unit will go to “Sleep” after a 2hr period of inactivity. The Boiling water will gradually drop to either 68°C or room temp, as shown in the table below and the Chilled water will be ON or OFF. When the period of inactivity passes, the home screen status window will show “Sleep Mode”.
LCD Screen operation - Section G Note: Any attempt, during OFF mode, to dispense water, will bring the unit out of sleep mode. The unit will return to sleep mode after 2 hours of non use. Please allow sufficient time for the water to reach the set temperature after disabling the sleep mode. In ON / OFF Mode the user may turn the unit ON or OFF at specific times for individual days or alternatively by weekly and/or weekend settings. To activate ON/OFF mode: 1. Press the [MENU] button for main 2. 3. 4. 5. 6.
LCD Screen operation - Section G Safety To set the tap safety setting: • Press [MENU] button for main menu. • Press [Setting] button. • Press [Safety] button. • Press button A - YES to allow the safety setting to be changed on the Tap A B C * To Enable or Disable the safety on the tap • Press button B to select Enable / Disable Hot Isolation: (Not available for HydroTap Arc/Cube) * The HydroTap is equipped with a safety mode that allows for additional safety protection, if needed.
LCD Screen operation - Section G Dispense Times The ability to change the maximum dispensing time for both the hot and cold water has been introduced. The default settings for the maximum dispensing times is 15 seconds. Here, the operator may change both the hot and cold dispensing times to between 5 and 15 seconds, in increments of 1 second. To edit the dispensing times: 1. Press the [MENU] button for main menu. 2. Press the [Setting] button. 3. Press the [Dispense Time] button. 4.
Filter Maintenance Water Filter The Zip HydroTap notifies when filter replacement is due. If you notice one of the following, you will need to change the filter: • The Change Filter light will flash white once a second and remain so until reset. • The filter percentage will show 0% on the Home screen. Note: Depending on local water quality conditions and usage, the filter may require changing anywhere from 1,000 Ltrs to 10,000 Ltrs.
Filter Maintenance Air Inlet Filter The Zip HydroTap air filter is conveniently located on the outside of the condenser. The filter screen is a sliding fit in the plastic housing on the side of the under sink unit. The screen may be removed for cleaning, by sliding it forward. This needs to be inspected at least quarterly, cleaned and replaced if damaged. Note: For best performance the unit should only be operated with a clean air filter screen, correctly fitted in place.
Gas bottle change 1. Turn the CO2 bottle regulator OFF (Anti-clockwise). The knob will screw up 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. and away from the bottle. Remove the bottle from the cupboard and disconnect the regulator. If the braided hose is removed from the regulator, be careful not to loose the small plastic sealing olive, located inside the end of the hose. Fit the regulator and hose assembly to the new gas bottle. Be aware that some CO2 may be discharged from the bottle joint.
Home Menu Icons Safety switch is LOCKED. The HydroTap will not dispense any Boiling water. See page 3 for safety switch operation Safety switch is UNLOCKED. Boiling water may be dispensed. See page 7 for tap operation details Sleep mode is active. There are 7 sleep mode options which display this icon on the home screen. See page 23 for details. Heater is in OFF mode. When this icon is displayed, no power is being supplied to the heating element. See page 24. 50% BOILING 98°C Filter use.
Notes This user manual has been written according to firmware version B02.4. Please check the following website for the latest user manual: https://www.zipwater.com/” 802006 - HT-BCS;BCSH A-AV User Manual - 09.2016- v3.
Contact Details Head Office Zip Heaters (Aust) Pty. Ltd. ABN: 46 000 578 727 67 Allingham Street Condell Park NSW 2200 Postal: Locked Bag 80 Bankstown 1885 Australia Website: www.zipwater.com Facsimile: (02) 9796 3858 Telephone: (02) 9796 3100 Free Call: 1 800 638 633 As Zip policy is one of continuous product improvement, changes to specifications may be made without prior notice. Images in this booklet have been modified and may not be true representations of the finished goods.
