Installation Guide

801314 - Zip HydroTap BC, BCHA, AIO, Installation Instructions - Aug 2015 - V2.01 Page 33 of 40
Installation Instructions
5.6 Model All-In-One Vented
HydroTap
AIO Mixer
Connections
Note: Take time to consider hose lengths when determining the mounting positions for the options
Options
RED
CLEAR
BLUE
BRAIDED
Tee piece and
Restricta! ow
valve
External COLD
isolation valve
(Not Supplied)
Options
POWER
CORD
USB
CHILLED
OUTLET
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT
BYPASS
OUT
Note:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the under
sink unit close
to the outlet tap,
within reach of
the hose and cord
lengths supplied
Note: All
silicon tubes
must be cut to
size. They must
have a constant
fall back to the
unit.
Note: The tube lengths are matched to the pumps performance and therefore CANNOT be lengthened