Installation Guide

804052 - CS Residential- Installation Instructions - Sept 2016 - v3.01 Page 3 of 20

HydroTap Specifications

Installation check list ....................................................................................................................4

General product features .............................................................................................................5

Important Safety Instructions .......................................................................................................6

Warnings and Regulatory Information ..........................................................................................7

Major components and Accessories ............................................................................................8

Technical Specification ................................................................................................................8

Before Installation and site requirements .....................................................................................9

STEP 1 -

Measure and cut all the tap holes before fitting the taps

Section 1 - See Tap Installation instructions, (supplied with the tap ) No. 803341

STEP 2 - Check for adequate ventilation

Section 2 - Ventilation

2.1 - Ventilation - All Models .............................................................................................10

2.2 - Ventilation diagram - CS Models ..............................................................................10-12

STEP 3 -

Fit the CO

Gas cylinder

Section 3 - CO

Cylinder and Regulator

3.1 - Connect, secure and test the CO2 gas cylinder .......................................................13

3.2 - Connect the regulator ...............................................................................................13

3.3 - Connect the gas hose to the regulator ......................................................................13

STEP 4

- Install the underbench unit

Section 4 - Underbench unit installation

4.1- Hose and Tube fittings ; J.G. Fittings .........................................................................14

4.2- Connect the gas hose to the undersink unit ...............................................................14

4.3- Test for gas leaks .......................................................................................................15

4.4- Installation and connection ........................................................................................15

4.5- Chilled Sparkling Models CS175 ...............................................................................16

4.6- Celsius Chilled Sparkling Model CSHA175 ...............................................................16

STEP 5

- Commission the HydroTap

Section 5 - Commissioning

5.1- Select the language ...................................................................................................17

5.2- CO Purge ...................................................................................................................17

5.3- Filter Flush .................................................................................................................18

Trouble Shooting

Trouble Shooting Table ................................................................................................................19

End of life disposal .......................................................................................................................19

Contact details .............................................................................................................................20

Index