Installation and Operation Guide

Page 32 of 36 802253 - HydroTap BC, BCHA-AV, AIO, Installation Instructions - June 2015 - V2.01
Installation Instructions
COLD isolation valve
(Not supplied)
Restrictafl ow valve
(Supplied)
Tee piece
(Supplied)
RED
CLEAR
BLUE
BRAIDED
POWER
CORD
USBMAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT
BYPASS
OUT
CHILLED
OUT
Booster
HT Mixer
connections
BRAIDED BRAIDED BRAIDED BRAIDED
4.6 Model: 4-In-One Vented
Note: The tube lengths are matched to the pumps performance and therefore CANNOT be lengthened
Note: All
silicon tubes
must be cut to
size. They must
have a constant
fall back to the
unit.
Note:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the under
sink unit close
to the outlet tap,
within reach of
the hose and cord
lengths supplied