Installation Guide

801910 - Zip Sparkling HydroTap - Installation Instructions - July 2015 - V2.01 Page 37 of 44
Installation Instructions
6.8 Model HydroTap 5-In-1 Vented with a Booster - BCSHA 240/175
Note: The tube lengths are matched to the pumps performance and therefore CANNOT be lengthened
HydroTap
Mixer
Connections
RED
BRAIDED
Tee piece and
Restricta! ow
valve (supplied)
External COLD
isolation valve
(Not Supplied)
GAS IN
POWER
CORD
USB
CHILLED
OUTLET
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT BYPASS
OUT
SPARKLING
OUTLET
CO2
IN
BLUE
Booster
option
Booster
CLEAR
WHITE
Note:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the under
sink unit close
to the outlet tap,
within reach of
the hose and cord
lengths supplied
Note: All
silicon tubes
must be cut to
size. They must
have a constant
fall back to the
unit.