Installation Guide

Page 32 of 44 801910 - Zip Sparkling HydroTap - Installation Instructions - July 2015 - v2.01
6.3 Models BCS 160/175
Installation Instructions
Note: The tube lengths are matched to the pumps performance and therefore CANNOT be lengthened
: Not required for standard BCS HydroTap models.
Min.
50 mm
side
Clearance
400mm
RED
CLEAR
BRAIDED
Max.
1000mm
Max.
500mm
POWER
CORD
USB
CHILLED
OUTLET
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT BYPASS
OUT
SPARKLING
OUTLET
CO2
IN
GAS IN
BLUE
WHITE
Note:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the under
sink unit close
to the outlet tap,
within reach of
the hose and cord
lengths supplied
Note: All
silicon tubes
must be cut to
size. They must
have a constant
fall back to the
unit.