Installation Guide

801910 - Zip Sparkling HydroTap - Installation Instructions - July 2015 - V2.01 Page 15 of 44

Cut a 35mm hole in the bench / sink top.

SINK TOP

1.10

35mm

Note: make sure the tap location will allow

the nozzle to drain into the sink.

Tap assembly exploded view and kitchen layout side view.

BRAIDED

HOSE x 3

Mixer Tap Installation

1.11

O-RING

LOWER

RUBBER

WASHER

NUT

External Mains

Blue band

Mixer IN

Red band

Mixer Out

Note

The mixer tap requires a Zip Restricta! ow

valve, as supplied, to be " tted in the cold

water supply line, from the isolation valve tee

piece, to the mixer tap. (See Fig. 1.13)

Min 300mm