Installation Guide

Page 14 of 44 801910 - Zip Sparkling HydroTap - Installation Instructions - July 2015 - v2.01
Installation Instructions
Height adjustment (Fixed position options)
1.7
O-RING
LOWER
RUBBER
WASHER
WASHER
NUT
1.9
Mounting (See table on Page 11 )
Cut a 35mm hole in the bench / sink top.
BENCH TOP
Ø35mm
A A
Left Hand Control Right Hand Control
B
C
C
B
50mm
Angular adjustment (Fixed position options)
1.8
NOTE: Position A is
not recommended with
Boiling water units