Installation Guide

Page 32 of 40 801530 - HydroTap B, BA, BHA, BAHA, Installation Instructions - July 2015 - v2.01
Installation Instructions
5.6 Model BA240
RED
CLEAR
BRAIDED
Booster
POWER
CORD
USB
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT BYPASS
OUT
AMBIENT
OUT
BLUE
: Not required for BA HydroTap.
Note:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the under
sink unit close
to the outlet tap,
within reach of
the hose and cord
lengths supplied
Note: All
silicon tubes
must be cut to
size. They must
have a constant
fall back to the
unit.
Note: To ensure ambient temperatures are maintained, fit the supplied insulation to the Blue tube.
Note: The tube lengths are matched to the pumps performance and therefore CANNOT be lengthened