Installation Guide

Page 22 of 40 801530 - HydroTap B, BA, BHA, BAHA, Installation Instructions - July 2015 - v2.01
Installation Instructions
1.20
Typical All-In-One Vented assembly with Booster heater (See section 5)
Booster
A-I-O Tap
280mm
335mm
Restrictaflow valve & Tee piece
(Supplied)
Note: The All-In-One vented taps require a Zip Restrictafl ow valve and Tee piece, as supplied, to be fi tted in
the cold water supply line, from the isolation valve (Not supplied), to the mixer tap. (See diagrams)
Restrictaflow valve
Note:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the under
sink unit close
to the outlet tap,
within reach of
the hose and cord
lengths supplied
Note: All
silicon tubes
must be cut to
size. They must
have a constant
fall back to the
unit.