Installation and Operation Guide

8
Quick Start Installation Guide
807120 v1.00 01.21 G5 C CS Quick Start Guide
SECTION 4: Technical data
Water supply pressure requirements
Technical data
Model
Power rating
kW
Dimensions
W x D x H (mm)
Weight
(kg)
CS100 0.37 330 (500)
#
x 477 x 333 36.5
C100 0.34 330 (500)
#
x 470 x 333 24.2
C40 0.16 330 x 470 x 333 24.2
CS Home 0.18 280 x 406 x 333 30
C Home 0.17 280 x 406 x 333 21
A pressure limiting valve must be fitted for mains water pressures
above the maximum limits stated above in accordance with local
plumbing regulations. Note: All models (excluding UK) have an
internal pressure limiting device to reduce the maximum mains regulated
pressure (700kPa in Australia), protecting the system against pressure
surges above 500kPa.
!
#
including vent tray
Water supply connection
1/2” BSP (G1/2).
Component
Min - Max pressure, kPA (bar)
Australia UK
HydroTap 170 (1.7) - 700 (7.0) 170 (1.7) - 500 (5.0)
Sparkling HydroTap 250 (2.5 ) - 700 (7.0) 250 (2.5) - 500 (5.0)
Electricity supply requirements
220-240V 50Hz AC (for power requirement see table above).
Required
Australia 1x 220 - 240V AC 10A socket
UK 1x 220 - 240V AC 13A socket