Installation and Operation Guide

14
Quick Start Installation Guide
807120 v1.00 01.21 G5 C CS Quick Start Guide
SECTION 8: Connect the water supply
Isolation valve
(not supplied)
Valves and fittings must be sealed with PTFE tape if compression
seals are not included.
!
Note correct strainer orientation.
Strainer
(supplied)
Male - Female
adaptor
(supplied)
Connect together
Connect to
Command Centre
see pages 21-24
Note Mixer tap installations also use a ‘Tee piece’ as part of the water supply
plumbing connections, see the Tap installation instructions supplied with the
Mixer Tap to connect the water supply if using the mixer tap option.
Connect to
Command Centre
see pages 21-24