Installation and Operation Guide

Quick Start Installation Guide

807119 v1.00 01.21 G5 BCS Quick Start Guide

SECTION 13: Connect the Command Centre

For HydroTap, mixer tap and any optional accessories, use

instructions supplied with individual kit components.

Connections key

HydroTap

CO

Braided hose

Command

Centre

USB

Tap

Generic installation instructions

Mains power cable

Installation diagrams are for illustrative purposes only.

Hoses are not shown to scale and cannot be lengthened.

Tips for hose connection

• Push the silicone hose over the

connector for a minimum of 15mm.

• Ensure there a constant fall from the

tap down to the command centre.

• Hoses must be trimmed to avoid

loops and kinks. Take care when

positioning before cutting and make

a clean cut straight across the hose,

using a sharp blade.

• The hoses must not be under tension

when installed.