Installation and Operation Guide

Quick Start Installation Guide
807119 v1.00 01.21 G5 BCS Quick Start Guide
13
SECTION 6: Set up the ventilation
4mm door buffers
(supplied)
If cupboard temperature exceeds 35°C, additional ventilation is required.
Contact your Zip service provider for options (including additional vents and
fan kit).
All models
• Cold air is drawn in through the inlet vent and lower gap provided by the
door buffers.
• Inlet vent is mounted over cupboard side, door or floor cut-out.
• Warm air is exhausted through upper gap provided by the door buffers.
Air inlet
Air outlet
BCS20, BCS30 & BCS Home models