Installation and Operation Guide

12
Quick Start Installation Guide
807119 v1.00 01.21 G5 BCS Quick Start Guide
SECTION 6: Set up the ventilation
100mm
Vent tray
The vent tray must be fitted. It provides a safe exhaust for
refrigerant gas in the unlikely event of a leak.
!
!
4mm door buffers
(supplied)
• Cold air is drawn in through the inlet vent and gap provided by the door
buffers.
• Inlet vent is mounted over cupboard side, door or floor cut-out.
• Warm air is exhausted through vent tray.
• Observe 100mm inlet / outlet vent separation (see below).
Air inlet options
Air outlet
BCS60 and BCS100 models
Vent tray dimensions WxDxH (mm): 500 x (515-555) x 40