User Manual

11
806143 - CW ChillTap UCCT 10.18 v1.03
Troubleshooting
Prior to any fault finding, please ensure all water connections to the chiller are sound and that the incoming water supply is
turned on. Also ensure that all electrical connections to the chiller are secure and that the chiller has had adequate time to cool
down.
Call a licenced electrician, plumber, or Zip free call in Australia on 1800 460 222, for assistance, service, spare parts, or
enquiries.
Symptom Possible Cause Responsibility Solution
No water
supplied
Mains water not connected or
turned on
User or Service
Technician
Connect or turn on water supply.
Water pressure regulator
failed
Service Technician
Contact local Zip Service
Provider.
Unit frozen up Service Technician
Contact local Zip Service
Provider.
Internal water leak Service Technician
Contact local Zip Service
Provider.
Water not chilled
No power
User or Service
Technician
Restore power to the unit.
Thermostat faulty or out of
calibration.
Service Technician
Contact local Zip Service
Provider.
Insufficient cooling air flow
through the refrigeration
system
Service Technician
Contact local Zip Service
Provider.
Refrigeration failure Service Technician
Contact local Zip Service
Provider.
Rated chilled water capacity
has been exceeded
User
Allow unit sufficient time to
recover.
Never use strong, corrosive or abrasive cleaning materials. Stainless steel
surfaces will show scratches if an abrasive cleaning product is used.
Wipe clean the outer surfaces with a sponge or a soft cloth using a mild soap
and water.
The louvres on the sides of the chiller unit need to be kept free of dust and lint
to permit free flow of air through the vents. They should be checked regularly, at
least monthly, and dusted or vacuumed.
Cleaning
In order to help preserve our environment we ask that you dispose of this product correctly. Please contact your
local city council for collection centre details.
End of life disposal