Product guide
8 9
Zip HydroTap
®
technology
Superior technology saves energy and
conserves water
Zip HydroTap
®
sustainability
Supporting the environment as never before
Power-Pulse™ energy saving technology
Reduces power consumption by allowing the system to
regulate its power during periods of high and low usage.
This saves energy whilst maintaining the tightest possible
temperature control.
Automatically calculates boiling point
Because boiling temperature varies by altitude, Zip
HydroTap pinpoints boiling point during installation and
sets it accordingly.
Sleeps when inactive
The system can be pre-set to power down after 2 hours
of non-use, but will still retain stored ‘boiling’ water at
an energy saving 64°C, or can also be set to hibernate
(power off completely). The system quickly recovers to
the pre-set boiling temperature upon further draw-off.
Programmable 24/7 timer
Pre-set the ‘power on’ and ‘power off’ times
(once a day) for those periods when the Zip HydroTap
will not be used, such as overnight or at weekends (for
commercial users).
Cuts down water wastage, too
Every drop of water is dispensed at the set temperature,
so there is, no longer any need to waste water running a
tap until the water is at the correct temperature
HydroTap technology
HydroTap technology
Conserves water
New, improved air-cooled system, with integral cross-ventilation,
does not dump water to waste. An environmentally responsible
solution.
Conserves energy
Choice of four energy-saving settings to allow installers or site
managers to adjust each set-up to operate with optimum energy
efficiency.
RoHS Compliant
All materials involved in Zip HydroTap manufacturer comply with
the European Restriction of Hazardous Substances Directive
2011/65/EC
WRAS Approval
All Zip HydroTap G4 commercial products carry the WRAS (Water
Regulations Advisory Scheme) accreditation.
G4
TECHNOLOGY
G4
TECHNOLOGY
G4
TECHNOLOGY
G4
G4
T
E
C
H
N
O
L
O
G
Y
G4
T
E
C
H
N
O
L
O
G
Y
T
E
C
H
N
O
L
O
G
Y
Standing heat-loss energy consumption comparison
(tests for a 24 hour period with no draw-off)
Example G3
models
Energy used
(Watts)
Example G4
models
Energy used
(Watts)
Energy saved
BC100/125 60.6 BC160/125G4 34 44%
BC150/175 74.5 BC240/175G4 36.2 51%
N.B. When the sleep mode facilities were activated on both the G3 and G4 models, the
G4 showed a 53% stand-by energy saving over the superceded G3 models.