Product guide

97
96
Zip Contract II
®
Over-sink water heater
Open outlet for single point of use
5, 10 litre
Insulation
Moulded, CFC free Polystyrene.
Approvals
WRAS, CE endorsed.
Warranty
One-year on site parts and labour. For full
details of the Zip Warranty Scheme visit:
www.zipheaters.co.uk/warranty
Safety features
Safety cut out in the event of
a thermostat failure.
Heater protected against freezing while
power switched on.
Installation
All models should be wall mounted.
Screws and wall fixings provided.
Plumbing
Can be connected to a rising main or to a
cistern with a minimum working head of
3metres.
Supplied with a 300mm open outlet spout and
water control valve.
Electrical
To be wired to a double pole switched fused
spur with a minimum break capacity of 13
amps. Installation must comply with current
IEE regulations.
Features and benefits
Open outlet oversink water heater for single
point of use.
External temperature control with
frost protection.
Over temperature safety thermal fuse
(C2/50 and C2/100).
Remotely resettable over temperature
protection (C3/50).
Supplied with inlet control valve and swivel
outlet spout.
Impact resistant, easy clean, white plastic
casing.
CFC-free insulation.
Choice of 5 or 10 litre capacity.
Capacities
5 litre, 10 litre.
Rating
2.0 kW @ 230V.
Heating element
Embedded rod type.
Thermostat
Capillary type adjustable
35˚C – 80˚C.
Inner container
Polypropylene tested to 1.5 bar.
Case
Impact resistant white plastic.
*For use with Zip Tudor P4/52UB and P4/102UB
* Specialist product for temporary site applications with remotely resettable dry start
protection. For details contact Zip Technical support.
Zip Accessories
Vented Point of Use
*UB6
Single lever
basin tap
*UB1
Monobloc mixer
TS1
Telescopic spout
350-600mm
*UB7
Single lever sink tap
C3/50 model C2/50 model
Product Code Capacity
Litres
Thermal Loss
kWh/day
Dimensions
W x H x D (mm)
Zip Contract
C2/50 5.0 0.32 255 x 215 x 390
C2/100 10.0 0.40 310 x 265 x 440
*C3/50 5.0 0.32 255 x 215 x 390
Hot water
Hot water