Product guide

82
83
Zip Varipoint II
®
Unvented water heater
Single or multiple outlets
10, 15 litre
Undersink & oversink
Safety features
Manually resettable over temperature safety
cut-out.
Pressure and temperature relief valve
supplied.
Expansion relief valve supplied, set at 6 bar.
Frost protection setting.
Installation
Separate models available for oversink and
undersink installation.
All models can supply one or more outlets.
No special taps required.
Undersink is floor standing or wall hung on
bracket (supplied).
Oversink is wall hung, on bracket (supplied).
Plumbing
Water connections
1
⁄
2” BSP.
Pressure and temperature relief valve
(supplied) should be fitted to heater.
Pressure relief valve (supplied) to be fitted in
cold water supply.
Should be installed only by a suitably
experienced installer of unvented electric
storage water heaters.
Oversink and undersink models not
interchangeable.
Electrical
To be wired to a double pole switched fused
spur with a minimum break capacity of 13
amps. Installation must comply with current
IEE regulations.
Supplied with 1 metre of pre-wired cable.
Features and benefits
Heavy gauge copper inner container tested
to 16 bar.
Five year warranty on inner container, two
years on controls.
Does not require an anode or regular
inspection.Supplied with temperature and
pressure relief valve.
Oversink and undersink versions available
10 litre or 15 litre.
External temperature control with frost
protection setting.
Element ‘ON’ neon indicator.
Supplied complete with wall mounting
bracket.
Capacities
10 litre, 15 litre.
Rating
2.2 kW @ 230V.
Heating element
Embedded rod type.
Thermostat
Capillary type adjustable up
to 75ºC.
Water tank
Heavy gauge copper, pressure tested to
16 bar.
Case
High impact resistant white plastic.
Insulation
High density, CFC-free polyurethane foam.
IP rating
24.
Approvals
WRAS, CE endorsed.
Warranty
Five year on site parts and labour warranty
on inner container, two years on controls.
For full details of the Zip Warranty Scheme
visit: www.zipheaters.co.uk/warranty
Product
Code
Power rating
kW@230V
Capacity
Litres
Thermal
Loss
kWh/day
Dimensions
W x D x H
(mm)
Zip Varipoint II Oversink
VP103 2.2 10.0 0.36 300 x 285 x 452
VP153 2.2 15.0 0.50 300 x 285 x 452
Zip Varipoint II Undersink
VP103UB 2.2 10.0 0.41 300 x 285 x 452
VP153UB 2.2 15.0 0.58 300 x 285 x 452
Hot water
Hot water
Underrsink
Oversink