Product guide

52 53
Zip Chilltap
®
Under-sink chiller
Filtered drinking water
Features and benefits
• Great tasting freshly filtered cool
drinking water for fitting on a sink.
• Filters out dirt, rust and other
particles contaminating drinking
water.
• Reduces chlorine and other
offensive water treatment chemicals.
• Delivers up to 140 glasses per hour.
• 0.2 micron filtration.
Storage capacity
Nominal 8 glasses.
Output capacity
Up to 140 glasses per hour at <10˚C.
Rating
0.3 kW @ 230V AC.
Chiller type
Fan cooled condenser with a compressor
rated at up to 0.25 hp.
Refrigerant type
Non-toxic R134A.
Under-sink case
Corrosion resistant white enamelled steel.
Sink mounted tap
Chrome plated brass with lever action tap
and swivel head.
Filtration
0.2 micron fully encapsulated externally
mounted double action carbon filter.
Approvals
WRAS, CE endorsed.
Warranty
One-year on site parts and labour. For full
details of the Zip Warranty Scheme visit:
www.zipheaters.co.uk/warranty
Installation
The tap should be:
Positioned to the rear of a sink.
Mounted on a flat surface.
Mounted at 45degrees to the edge
of the sink so it drains into the sink
when running.
The under-sink chiller must be:
Located asclosely as possible to, and
directly beneath thetap.
Installed with clearances of 50mm left,
right and above, with 65mm to rear.
Filter should be:
Mounted where readily accessible on
the chiller or on the adjacent cupboard
wall.
Plumbing
Water connections 15mm push-fit.
If the water pressure is above 7 bar a
pressure reducing valve (AQ3) should be
fitted
Electrical
To be wired to a double pole switched
fused spur with a minimum break capacity
of 13 amps. Installation must comply with
current IEE regulations.
Product Code Maximum chilled
glasses/hour
Power rating
kW@230V
Dimensions
W x D x H
(mm)
Zip Chilltap undersink, sink mounted tap
CH103 140 0.45 355 x 290 x 385
Chilled drinking water Chilled drinking water