Product guide

38 39
Zip Hydroboil
®
Wall mounted instant boiling water
1.5, 3, 5, 7.5, 10, 15, 25, 40 litre
Heating element
Long-life incoloy sheathed
embedded rod type.
Dry start protection.
Boiling chamber
Twin chamber-stainless steel.
Steam-Heat-Boost technology.
Crevice-free stainless steel with removable
access ports, top and bottom.
Insulation
Compressed high temperature insulation
panels on sizes below 10 litres, engineered
for easy boiling chamber access. High
efficiency aluminium backed mineral wool
insulation on other sizes.
Thermostat
Capillary type.
Case
Stainless steel or corrosion
resistant white enamelled steel.
Tap
Two way, chrome-plated classic,
catering style.
Approvals
WRAS, CE endorsed.
Warranty
Two-year on site parts and labour. For
full details of the Zip Warranty visit:
www.zipheaters.co.uk/warranty
Installation
Install over a draining board, or work top
fitted with a drip tray. Tap spout should
be no higher than is necessary to fill large
pots. Minimum tap height above draining
board for on-wall maintenance is 200mm.
Plumbing
Designed for connection to a potable cold
water supply with a minimum pressure
of 0.7 bar. If pressure exceeds 7 bar
a pressure limiting valve must be fitted.
An isolating valve should be installed
between the mains supply and the system.
Concealed plumbing
Connect inlet and vent pipes from the rear via
15mm capillary elbows.
Exposed plumbing
Connect inlet and vent pipes from below
directly to 15mm compression fittings.
Venting
The vent must discharge to a safe and
visible position using a tundish.
Electrical
To be wired to a double pole fused spur,
minimum break capacity of 13 amps.
Installation must comply with current IEE
regulations.
Caution
In some hard water areas where scale is an
issue we recommend the fitting of the Zip
Inline filter.
Product Code
Case Finish
s/steel white
Capacity
litres
Delivery
cups* at any
one time
Recovery
cups*
per hour
Rating
kW@230V
Dimensions
W x D x H
(mm)
- HS001 1.5 9 100 1.5 289 x 180 x 335
- HS003 3.0 18 100 1.5 289 x 180 x 431
HS105 HS005 5.0 30 140 2.4 318 x 198 x 465
HS107 HS007 7.5 45 140 2.4 318 x 198 x 578
HS110 HS010 10.0 60 180 3.0 390 x 244 x 600
HS115 HS015 15.0 90 180 3.0 390 x 299 x 600
HS125 HS025 25.0 150 180 3.0 390 x 299 x 780
HP140 HP040 40.0 240 240 2 x 3.0 515 x 284 x 840
Zip Hydroboil with Classic tap
* Standard cup size 167ml
Wall mounted instant boiling water
Wall mounted instant boiling water