Installation and Operating Instructions Zip Chilltap ® Undersink chiller Affix Model Number Label Here 82127 Model: CH103 Undersink chiller Zip Chill Tap - Installation & Operating Instructions - 82127 - June 2012 v1.
Contents Safety Information.......................................................................................................................................... Page 2 Technical Data................................................................................................................................................ Page 3 Parts List........................................................................................................................................................
Safety Information Continued This appliance must not be used by any person (including children) with limited physical, sensorial or mental abilities or failing experience and / or knowledge unless they are supervised by a person responsible for their safety or received instructions about how to use the appliance. Children should be supervised in order to make sure that they do not play with the appliance. The appliance must only be used when correctly installed and in perfect working order.
Carafe filler Connects to incoming water supply 1/4” TO 15MM PUSH FIT Outlet Filter and housing assembly Inlet Chilling unit Parts List Part No. Description Optional Accessories SP81108 Carafe Filler Part No. SP80168 Handle (carafe filler) HE45004** Water Block (Water Shut Down System) SP7036 Thermostat (Not Shown) AQ3 SP87674 Filtration Kit ZT002 Sub Micron Filter HE45004 Description Pressure Reducer set at 0.35 MPa (3.
Installation Instructions Installing the Chiller Site the chiller unit into the cupboard as close to the proposed outlet tap position as is possible to minimise the length of tubing exposed between the chiller unit and the outlet tap. Allow at least 50mm around the chiller unit to permit free airflow. Both the top and the front of the chiller must remain accessible for servicing purposes.
Installation Instructions continued Ensure there is adequate ventilation available through the cupboard. If there is inadequate ventilation, and the cupboard temperature rises to above 40°C, the chiller may become damaged and malfunction which will void the product warranty. There must be a minimum 168 cm2 of cupboard cross-flow ventilation. Suitable holes or vents will need to be cut into the cupboard and door.
Maintenance Filter Replacement The Zip Chill Tap Under Counter Chiller has a separate filtration system connected to the incoming water supply line. For safe operation, the filter cartridge should be replaced every 6-12 months, or earlier if you notice a persistent reduction in water pressure from the appliance or an unpleasant taste or odour in the water. WARNING Not changing filtration cartridges when required, may cause the water to become biologically unsafe.
Warranty Information Certain warranties may be implied by law into your contract with Zip. The warranty provided below is additional to these implied warranties and nothing set out below shall limit your statutory rights or rights at law.
Notes Page 9 of 10 Zip Chill Tap - Installation & Operating Instructions - 82127 - June 2012 v1.
Contact Details Zip Heaters (UK) Ltd, 14 Bertie Ward Way, Dereham, Norfolk, NR19 1TE www.zipheaters.co.uk Telephone: 0845 6024533 Fax: 01362 692448 Web: www.zipheaters.co.uk e-mail: info@zipheaters.co.uk Registering Your Purchase Registering your Zip installation on the Zip website may help to establish date of installation should it become necessary to service the appliance under terms of the Zip warranty. Zip Chill Tap - Installation & Operating Instructions - 82127 - June 2012 v1.
