User manual

Control Unit and RTU Installation Procedure
Document Number: ECP 05-9531
Version: 2.0
Date: 03/09/2014
© UK Power Networks 2014 All rights reserved 28 of 29
F.2 T200E Circuit Label
The label shown below is provided on the inside of the door on a T200E and is supplied on
all EPN and SPN units from September 2008. Spare labels for use on older stock are
available from Schneider Electric.
Engraved circuit labels of size 55mm x 25mm shall be added for each switch/circuit-breaker
in use as shown below.
Another engraved label of size 86 x 15mm (with four equal sections) showing all circuits
shall be placed over the yellow paper strip as shown below.
Adhesive Label
on Back of Door
Engraved Label
86 x 15mm
Engraved Labels
55mm x 25mm