User manual

Control Unit and RTU Installation Procedure
Document Number: ECP 05-9531
Version: 2.0
Date: 03/09/2014
© UK Power Networks 2014 All rights reserved 16 of 29
A.2 Schneider T200E Series 3
The T200E can be used to control Schneider switchgear (with rotary and/or linear actuators)
and other switchgear via the standard secondary switchgear telecontrol interface. The
T200E can also be used to control retrofit actuators on legacy oil switchgear using an
additional interface card. Each switch to be controlled needs an umbilical cable connection
to the T200E. For further information refer to the relevant commissioning procedure.
External
Modem
Battery
Switchgear
Interface Card
Mains Supply
and Isolation
Cable Entry
CONTROL
Module
Configuration
Port
POWER
Module
COM
Module
Local Control
Panel
(See Figure 6)
Internal
Modem
FPI
Modules
Switchgear
Connectors
MODBUS
Port