Specification Sheet

Water Pressure
Water Connection
Integral Water Values
Water Supply Requirements
Total Dissolved Solids (TDS)
Integral Water Filter
Power Rating
Power Supply Requirements
Dimensions (WxDxH)
Minimum Air Gap
Dry Weight
Product Approvals
Warranty
CO
2 Cylinder
CO
2 Capacity
CO
2 Operating Pressure
COMMAND CENTER SPECS
Min 30psi – Max 75psi with a minimum ow rate of 1 gpm
½” BSP - isolation valve is required within 3’ of the installation
HydroTaps are tted with a Dual Check Valve and a 50psi Pressure Limiting Valve
Potable drinking water supply
TDS Min 50ppm – Max 120ppm
0.2 micron, 1.5 size - Replace every 1,800 gallons or 6 months
220-240V, 50 Hz, 2.3kW
220-240V, 50/60Hz 15 amp power supply with a NEMA 6-15 outlet
15.5” x 18.3” x 13.1”
Clearances are required - 2” Left side , 2” Right side , 8”Above
95lbs
WQA - NSF/ANSI 372, 42 & 53, cUL, CEC, ADA compliant
2 years (1 year Limited Warranty plus additional 1 year Warranty is available on product registration)
1 x 5lb Beverage Grade Carbon Dioxide Cylinder
Approximatly 1,600 8oz cups
Min 39psi - Max 43psi
Installation and connection of your HydroTap must be carried out by a qualied person, observing all local, state & federal regulations. You will require suitable 220 -240V 50/60Hz 15 amp power supply with a NEMA
6-15 electrical outlet within 3’ of the product. The HydroTap is an air-cooled system so discrete cabinetry cut-outs are required for ventilation. Installation on most counter tops is straightforward however some stone
counter tops may require a specialized cutting service. If using a drip tray (font) accessory suitable drainage to a trapped waste is required within 3’ of the installation. If you live in an area with hard water (more than
120ppm), we recommend installation of a scale ltration kit. Sufcient space and clearance to install the HydroTap as detailed in the product installation guidelines is required. Installation by Zip Professional Service
can be arranged with a phone call to 1-833-233-2358 or through www.us.zipwater.com
HYDROTAP
®
CLASSIC FOR OFFICE
*maximum ofce size = 60 people
19ZIP016_ClassicOfceBCS_240v_v1
207
Classic
Faucet
A
A
SCALE 1:5
SECTION A-A
35 (1 ") hole
Sink shown only
Position the Faucet to dispense into the sink
bowl with ample clearance for a cup or a carafe.
Alternatively, the Faucet may be mounted away from
the sink using a Zip Font, available as an accessory.
3
8
(8 ")
3 mm ( ")
buffer pad
air space
1
8
1
8
207
Classic
Faucet
A
A
SCALE 1:5
SECTION A-A
35 (1 ") hole
Sink shown only
Position the Faucet to dispense into the sink
bowl with ample clearance for a cup or a carafe.
Alternatively, the Faucet may be mounted away from
the sink using a Zip Font, available as an accessory.
3
8
(8 ")
3 mm ( ")
buffer pad
air space
1
8
1
8
(1 ")
11
16
See Detail A
See Detail C
See Detail B
45
450 min.
284
60 min.
Detail B. Cabinet
Floor Cut-Out
326
max. 43
5
Detail C. Cabinet Floor Cut-Out
60
285
==
Detail A. Kickboard Cut-Out
(11 ")
1
4
(2 ")
3
8
(1 ")
3
4
(17 ")
3
4
(11 ")
3
16
(2 ")
3
8
(12 ")
15
16
( ")
3
16
IEC Flex & Plug
230-240V, 50Hz
power outlet
Mains cold water
isolation valve
(not supplied)
200 min.
333
Clearance
Envelope
(13.1")(7.9")
(2.0") (2.0")(15.5")
394 50 min.
50 min.
(18.3")
464
CO gas
cylinder
2
135
(5.3")
(14.2")
361
240V
SINGLE
PHASE
POWER
240V