Sheathing and Tape For Resilient Roofs

Three panel thickness let you choose the strength and protection you need for you build.

ENGINEERED FOR A VARIETY OF ROOFING MATERIALS

PROTECTION AGAINST WATER INTRUSION

The combination of a built-in water-resistant barrier and taped panel seams on

a high-strength engineered wood panel, eliminates the need for felt and protects

if high-winds blow off roof coverings.

STRUCTURAL DURABILITY FOR HIGH-WIND ZONES

The Structural 1-rated engineered wood panel provides strength and stiffness

for a dependable roof deck. Meeting seismic and high-wind zone code requirements.

INSTALLS FAST, ELIMINATING RE-WORK

Save installation time by eliminating the need for felt. With a built-in water-resistive

barrier there’s no risk of water getting behind your protective outer layer and

damaging sheathing panels, which can cause costly delays for re-work.

QUICKER ROUGH DRY-IN

With ZIP System sheathing and tape, you can reduce the amount of steps to

create a sealed roof deck to help achieve quicker dry-in status.

Metal Shingles & PanelsAsphalt Shingles Clay & Concrete Tile

To locate a dealer

call 1.800.933.9220

or visit ZIPsystem.com/Roof

All ZIP System

products

are backed by a 30-year

Limited Warranty.

*Limitations and restrictions apply. Visit ZIPsystem.com for details.

“ The idea behind using ZIP System sheathing and tape on a roof is

that during high winds, even with the loss of shingles, the house is

built storm tight with added protection against water penetration.”

TODD PIPER, COASTAL BUILDER

THE FASTEST WAY TO A RESILIENT ROOF

To protect against extensive water intrusion in a high-wind event, choose the all-in-one

sealed roof deck solution with a unique combination of structural durability, built-in moisture

resistance and strength you need for a durable roof system base. That’s exactly what you

get with ZIP System

sheathing and tape.

Go to our technical library for

speciﬁ cations and performance details

for 7/16", 1/2", or 5/8", panel options.

7/16" Combo Panel

1/2" and 5/8" Combo Panels

1. Sheathing panels stamped with Structural 1 panel grade are required to meet or exceed racking shear and cross-panel

strength and stiffness listed within the Voluntary Product Standard (PS2-10) for Wood-Based Structural-Use Panels.

LLC. Huber is a trademark of J.M. Huber Corporation. Huber Engineered Woods products are covered by various patents. See ZIPSystem.com/

patents for details. HUB 0000 REV 10/16