User's Manual

55
configuration. The default administrator’s password should be changed on the very first system setup.
User Name: specifies the name of the system user.
New Password: new password used for administrator authentication should be specified.
Confirm Password: new password should be re-entered to verify its accuracy.
5.5.4 TR-069 Config
TR-069 stands for CPE WAN Management Protocol. It is a protocol for communication
between Customer Premise Equipment (CPE) and Auto-Configuration Server (ACS) that
encompasses secure auto-configuration as well as other CPE management functions
within a common framework. On this page you can configure the TR-069 CPE and change
the setting of ACS.
TR069: enable or disable TR069 function by choosing On or Off. After enabled this function,