User's Manual

54
5.5.1 Upgrade Firmware
New version of firmware will be released to improve the various efficiency or to fix some
bugs. Following the steps show below so as to realize upgrading. This page allows you to
upgrade the Access Point firmware to new version.
Please note: DO NOT power off the device during the upload because it may crash the
system.
Firmware version: shows the current firmware version.
Choose File: select the firmware version you want to upgrade on your computer.
Click Upload to upgrade the firmware version.
5.5.2 Save/Reload Setting
This page allows you to save current settings to a file or reload the settings from the file
which was saved previously. Besides, you can reset the current configuration to factory
default.
Save Settings to File: click Save… button to download the current settings of the Access
Point to your computer.
Load Settings from File: if you want to reload the settings from the file saved before, you
could click Choose File button to choose the right file then click Upload button.
Reset Settings to Default: this Reset button is provided to allow you to restore the router
settings to the default factory settings.
5.5.3 Web Login Password
In this section you can modify the administrator password to protect your device from unauthorized