User's Manual

32
parameters.
User Name/Password: enter the User Name and Password provided by your ISP.
WAN DHCP type: it’s available only for PPPoE connection. If your ISP provides an extra
type to connect to a local area network such as DHCP Client/Static IP/normal PPPoE, you
should select the type and enter the right parameters provided by ISP to enable the
secondary connection.
DNS: Domain Name System. If you select Set DNS Manually, you will have to type in the
DNS address by yourself. It is chosen to Attain DNS by default.
Connection Type: provides three modes to connect to the Internet.
z Constant: the connection can be re-established automatically.
z Connection on demand: the Internet connection can be terminated automatically after
a specified inactivity period (idle time).
z Connection manually: you can click Connect or Disconnect button to
connect/disconnect immediately.
Service Name (AC): this is optional. It describes the service name your ISP provided to
you. Generally, leaving these fields blank will work.
MTU: it means Max Transmit Unit for packet. When using slow links, large packets can