User manual

9
Item Item name
Description
A
PLC Link/ACT LED
On: Powerline Link Detected (*1)
Blinking:
(1) Powerline traffic detected (*1)
(2) Powerline device not in any logical
network.
Off: No Powerline traffic detected
B
Ethernet Link/ACT LED
On: Ethernet Link Detected
Blinking: Ethernet traffic detected
Off: No Ethernet Link detected
C
POWER LED
On: Power on
Blinking:
(1) Booting or
(2) Joining a device to another device’s
network.
Off: Power off
D
Reset-to-factory-default
Button
Press to reset Firmware setting to Factory
default
E GROUP Button
Press 2 seconds to join a device into a
logical network or clear grouping information
*1 : The “PLC Link/ACT “ LED indicator turns “ON” when Powerline link is detected. If the device is serving as a STATION,
the LED indicator will flash to indicate transmit or receive Powerline activity. If the device is serving as a CCo (Central
Coordinator), the LED indicator will steadily light ON, even in the presence of Powerline activity.