User manual

Chapter 4 Other Information

4.1 Troubleshooting

Symptom

Solution

No picture on display

Make sure the power cord is connected to

an AC outlet, DC plug is connected to DC IN

port and the power LED is on.

Make sure the display's power is on.

Check the connection of your source signal.

To reset the Real Scan, unplug the DC IN

adapter from the unit and then plug it back in

again.

The remote control can't

control the Real Scan.

Make sure batteries are installed.

Check remaining battery life.

Video is distorted

Check all of the connection.

If you still have difficulties that you can't resolve using the tips described above,

please unplug and plug in the AC cord to reset your Real Scan. Otherwise,

please call your local agency for servicing.

Operation Instruction