ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL Real Scan ZINWELL ZINWELL ZINWELL ZINWEL
Table of Contents Chapter 1 Introduction 1.1 Important Notices............................................................................................... 2 1.2 Product Functions.............................................................................................. 2 1.3 Package Contents.............................................................................................. 3 Chapter 2 Installation 2.1 Product Outward..........................................................................
Chapter 1 Introduction Thanks for your purchase of Zinwell Real Scan. With Real Scan, you can turn your existing standard video to a high quality on your display devices. The system set up is very easy and there is no additional requirement for hardware or software. You don't need to learn a complicated set up procedure and you can enjoy your Real Scan with just plug and play. 1.1 Important Notices Please use the Real Scan under a normal environment 1. Try to avoid the following circumstances.
1.3 Package Contents As you unpack the Real Scan, please make sure the following items were included. If any of these items are missing, call your local agencies. 1. Real Scan .......................................................................................x1 2. Power supply ..................................................................................x1 3.Video cable.......................................................................................x1 4.S-video cable...........................
Chapter 2 Installation 2.1 Product Outward 2.1.
2.1.2 Rear view of Real Scan 5 4 3 2 1 1 VIDEO INPUT Please connect the external video from VCR, LD, V8 or video game to the VIDEO INPUT of box. 2 S-VIDEO INPUT If the external video is s-video, please connect to the S-VIDEO INPUT of box. 3 VGA OUTPUT Please use the VGA OUTPUT to your progressively scanned TV or projector. 4 DC IN Please connect to your 12V power supply. POWER Switch between power-on and power-off.
2.2 System Installation : Progressively Big Screen scanned TV TV or projector Video cable DVD/VCR/LD/IRD S-VIDEO cable Camera Video game Adapter Please turn off the power of all devices before connection.
Chapter 3 Operation Instruction 3.1 Initial Setting When you finished the connections of Real Scan, because all the function settings are in the IR control, please refer to the following instructions of IR control and start the system setting. Steps: 1. Please install 2 AAA batteries into IR control. 2. Please refer to p6 for your configuration. 3. Turn on the power. 4. Press the "C-Video" or "S-Video" button to select signal source.
3.2 IR Control 1 POWER Switch between power-on 2 Select Select the currently highlighted menu item 3 Exit Exit the current menu selection and return to the parent menu. Press this key repeatedly to close all menus. 8 Res. Select resolution of 1024x768, 800x600 and 640x480. 7 Menu Display the main menu 6 Adjust the selected item on menu or adjust the volume Press to select desired item on the menu or select 4 C-video Composite Video select.
3.3 Advanced Setting 3.3.1 MAIN MENU The MAIN MENU shown below displays when you press "Menu" button. Press " " or " " button to select one of them below and press "Select" button to enter Sub-Menu. MAIN MENU PICTURE OSD PREFERENCE EXIT SEL 3.3.2 PICTURE setting PICTURE Sub-Menu provides BRIGHTNESS, CONTRAST, SATURATION, SHARPNESS, HUE adjustment modes and RESET. 1 To select BRIGHTNESS, CONTRAST, SATURATION, SHARPNESS or HUE, press " " or " " button. 2 To adjust selected item, press " " or " " button.
3.3.3 OSD setting OSD Sub-Menu provides OSD POSITION selected mode and RESET. 1 To enter OSD POSITION, press "Select" button in OSD. Using " ", " " or " ", " " button to adjust OSD menu to where you want on the screen. 2 When you are finished making OSD POSITION adjustment, press "Exit" button back to main menu. 3 Select RESET to return adjustments back to factory settings.
3.3.4 PREFERENCE setting PREFERENCE Sub-Menu provides RESOLUTION and INPUT SIGNAL modes. 1 2 3 4 To select RESOLUTION or INPUT SIGNAL , press " " or" " button. To enter "1024 x 768", "800 x 600" or "640 x 480", press "Select" button in RESOLUTION. Press " " or " " button to select one of them, then press "Select" button to confirm setting and return to Sub-Menu simultaneously.
Chapter 4 Other Information 4.1 Troubleshooting Symptom No picture on display Solution Make sure the power cord is connected to an AC outlet, DC plug is connected to DC IN port and the power LED is on. Make sure the display's power is on. Check the connection of your source signal. To reset the Real Scan, unplug the DC IN adapter from the unit and then plug it back in again. Video is distorted The remote control can't control the Real Scan. Check all of the connection.
4.2 Specifications POWER 12VDC 1.
14 Operation Instruction
ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZINWELL ZIN
