User manual

Chapter 3 Operation Instruction
When you finish the connections of Brite-View, please refer to the following
instructions of IR control and start the system setting, because all the function
settings are in the IR control.
Steps:
1. Please install 2 AAA batteries into IR control.
2. Please refer to p6 for your configuration.
3. Turn on the power.
4. Press the "Video", "S-Video" or "YCbCr" on IR control button to select input
signal Source.
5.Switch YPbPr or RGB on Brite-View to select output signal.
3.1 Initial Setting
7
Operation Instruction