User manual

Operation Instruction
Chapter 4 Other Information
4.1 Troubleshooting
Symptom
Solution
No picture on display
Make sure the power cord is connected to
an AC outlet, DC plug is connected to DC IN
port and the power LED is on.
Make sure the display's power is on.
Check the connection of your source signal.
To reset the Brite-View, unplug the DC IN
adapter from the unit and then plug it back in
again.
The remote control out of
function
Make sure batteries are installed.
Check remaining battery life.
Video distorted
Check all of the connection.
Brite-View;
If you still have difficulties not resolvable by using the tips described above,
please unplug and plug in the AC cord to reset your otherwise,
please call your local agency for servicing.
11