Installation & Assembly

Place the second piece of foam in the other half of

the exterior cover.

Use the zipper on the outer cover to seal the entire unit

together. Allow up to 48 hours for the foam to completely

recover to its intended height.

With the zipper on the exterior cover facing up, place

one half of the foam in the smaller zipper-guarded

compartment of the cover and zip it up.

COVER--

FOAM--

Green Tea Foam

High-density Base Support Foam

Green Tea Foam

High-density Base Support Foam

1 2

3 4

PET BED

Set-up Instructions

Unzip and peel back the outer bag. Remove the plastic

cover to allow the foam to expand for about 30 minutes

before putting on the outer cover.

14.7x 21cm