Instruction Manual

ManualsBrandsZintronic ManualsMobile PhoneZintronic Adding Camera To The Network Using Mobile Phone

Adding camera to the network using

mobile phone

This manual refers to Zintronic ‘A’ & ‘P’ series.

Table of contents:

Section I - Camera proper connection and configuration via mobile phone

● Connecting camera to the power supply......................……………………………………………………

● Connecting via WiFi hotspot to the camera network....…………...……............................................…

Section II - Adding camera to the CamHiPro application after connecting with WiFi hotspot……………

● Adding camera to the CamHiPro application.......................................................................................

● Adding camera to the WiFi home network using CamHiPro application .............................................

I. Camera proper connection and configuration via mobile phone

● Connecting camera to the power supply

● Connect camera using cable power supply 12V from the box, as shown on the picture below

Summary of content (11 pages)

PAGE 1
Adding camera to the network using mobile phone This manual refers to Zintronic ‘A’ & ‘P’ series. Table of contents: Section I - Camera proper connection and configuration via mobile phone ● Connecting camera to the power supply......................…………………………………………………… ● Connecting via WiFi hotspot to the camera network....…………...……............................................
PAGE 2
● Connecting via WiFi hotspot to the camera network: ▪ A and P camera series are generating their own WiFi network, to add camera we have to go to mobile phone Settings and then check available WiFi networks ▪ Choose camera network IPCAM-xxxxxx-xxxxx (where x digits and letters are assign to camera UID) ▪ Connect with camera WiFi hotspot according to the example as shown on pictures below ▪ Choose camera WiFi network ▪ Fill in the password (01234567) ▪ After connecting choose “Connect anyway?”
PAGE 3
. 3
PAGE 4
II. Adding camera to the CamHiPro application after connecting with WiFi hotspot • Adding camera to the CamHiPro application • Turn on the CamHiPro application • We click „+” button in the top right corner or “Click Add device” in the middle of the screen (when we have not added any other camera yet) .
PAGE 5
▪ We choose an option „IP Camera” ▪ In the next step application will automatically forward us to adding camera to the network, when it will be detected ▪ It will be shown like on pictures below .
PAGE 6
▪ Choose an option „Yes, I want to add this device” ▪ It will show UID number of the camera, login and password as default: admin, admin (we don’t change anything) ▪ In the next step click „Add to” .
PAGE 7
▪ After adding camera configure the WiFi network ▪ Look for the name of our WiFi local network on the list and select proper one ▪ Then fill in the password to our WiFi local network ▪ In the next step accept by clicking „Configure wireless and add” ▪ Give a name to our camera or we choose one of shown suggestions, then click “Confirm” ▪ Camera will connect to our WiFi local network and it will stop emulating its own WiFi hotspot .
PAGE 8
. 8
PAGE 9
. 9
PAGE 10
▪ After that the CamHiPro application will force password change when we will click on the screen ▪ Click „OK” ▪ The old password is admin .
PAGE 11
▪ Create your own new password (it has to contain at least 8 characters: at least 1 uppercase letter, lowercase letter and a digit!!!) ▪ Repeat the new password ▪ Then click „Apply”. ▪ After that our camera will be online when we come back to the main menu and view from the camera will be available after clicking on the screen ▪ Configuration completed! .