Technical Specifications

TECHNICAL DATA OKN-01
OKON S-20 WATER REPELLENT SEALER FOR DENSE CONCRETE AND MASONRY
Rust-Oleum Corporation Form: JPB-01
11 Hawthorn Parkway Phone: [phone] Rev.: 051513
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
OKON S-20
Resin Type
Silane / Siloxane
Color
Colorless
Solvents
Water
Weight
Per Gallon
8.41 lbs.
Per Liter
1.0 kg
Volatile Organic Compounds
<50 g/l
(0.42 lbs./gal.)
Application Parameters
45°F to 90°F (7°C to 32°C)
<85% Relative Humidity
Practical Coverage R
(assume 15% material loss)
Pre-cast/Tilt-up
Smooth
Exposed Aggregate
80-100 sq. ft/gal.
50-100 sq. ft/gal.
Stucco, plaster
Smooth
Textured
100-150 sq. ft. /gal.
80-120 sq. ft. /gal.
Brick, non-glazed
Clay
Concrete
100-150 sq. ft. /gal.
80-100 sq. ft. /gal.
Dry Times at 70°F
(21ºC) and 50%
Relative Humidity
Recoat
Wet-on-wet, if required
Foot Traffic
8 Hours
Vehicular Traffic
24 hours
Protect From Rain
24 hours
Protect From Dew
12 hours
Shelf Life
12 months unopened in protected storage.
Flash Point
>200ºF (93ºC)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.