Technical Specifications

11 Hawthorn Parkway

Vernon Hills, IL 60061

B-I-N

Shellac-Base

Technical Data Bulletin

Product No.

Primer-Sealer/Stain Killer/Bond Coat

Performance Characteristics

• Dries in minutes, can be recoated in 45 minutes

• Superior adhesion to glossy surfaces without scuff sanding

• High-hiding formula blocks stubborn and persistent stains

• Seals porous surfaces with excellent enamel holdout

• Can be applied in freezing temperatures

• Permanently blocks every kind of odor

• Seals bleeding knots and sap streaks

• Dried film is non-toxic and hypo-allergenic

00900

00901

00904

00908

Recommended Uses – Recommended for application to interior ceilings, walls, doors, trim, cabinets, furniture, and

related paintable surfaces. Exterior uses are limited to spot priming only. May be used to block water, grease, rust,

smoke, asphalt, graffiti, and many other types of stains.

• Interior - New and previously painted drywall, cured plaster/cement based coatings, wood (pine, fir, cedar, redwood,

plywood), metal (aluminum, steel, stainless steel, copper), vinyl, PVC, fiberglass, cured masonry (stucco, concrete block,

poured concrete, brick). Blocks stains and odors resulting from water & fire damage, seals stains from dark colors,

grease, rust, creosote, asphalt, crayon, lipstick, graffiti, markers, knots, sap streaks, tannin bleed, etc.

• Exterior - Spot prime persistent bleed from knots and sap streaks before full-surface priming with water or oil base

primer.

• Sealing – B-I-N seals unpainted or porous surfaces so topcoat paints have better coverage. It fills and binds wood

fibers to create a smooth, sealed surface with “enamel holdout” so fewer coats of paint are needed. Note that very

porous surfaces may require two coats and may reduce square foot coverage of the product.

• Mold & Mildew Resistance – Resists the growth of mold and mildew on the primer film.

• Stain Blocking – Can B-I-N is the ultimate interior stain killing primer. One coat will effectively block stains, including

water, nicotine, ink, graffiti, crayon, marker, rust and smoke stains so they won’t bleed into the topcoat. Some stains

require a second coat. Recommended for permanently sealing heavy fire and water stains B-I-N seals in smoke stains and

odors caused by fires. It also seals in urine and other animal odors from smelling. B-I-N may be used in areas where

incidental contact to food items occurs. B-I-N is also recommended for sealing nicotine stains or odors from tobacco.

• Over Wallcovering – B-I-N may be used to prime existing, soundly adhered, non-porous wallcoverings to hide

patterns/dark colors prior to painting.

Glossy Surfaces – Glossy enamel paint and clear finishes, ceramic tile, paneling, cabinets and metal surfaces can be

primed without sanding or deglossing.

PAGE 1
Technical Data Bulletin 11 Hawthorn Parkway Vernon Hills, IL 60061 B-I-N ® Shellac-Base Primer-Sealer/Stain Killer/Bond Coat Product No.
PAGE 2
Surface Preparation - Surfaces should be clean, dry, sound and free of dust, dirt, excessive chalky material, grime, grease, oil, wax, mildew, wallpaper adhesive or any contamination that may interfere with adhesion. If unsure, always wash surface with a household ammonia and water solution, appropriate cleaning solution, or solvent (Do not use TSP as a cleaner). Remove any unsoundly adhered coatings. Sand any remaining paint film edges smooth with the surface.
PAGE 3
WARNING: Flammable liquid and vapor. Contains ethanol. Keep away from heat, sparks, and open flame. Use with adequate ventilation. Do not smoke while using. Do not get in eyes. In case of eye contact, flush eyes with plenty of water for at least 15 minutes. Do not breathe vapors. If you experience difficulty in breathing, eye watering, headache or dizziness, increase fresh air or leave the area to obtain fresh air. If symptoms persist get medical attention.