Technical Specifications

TECHNICAL DATA
FP2-02
ZINSSER
®
FASTPRIME
™
OIL-BASE
INTERIOR PRIMER-SEALER
2
Form: ARJ-2023
Rev.: 032320
PRODUCT APPLICATION
APPLICATION (cont.)
Apply with a synthetic (nylon, polyester or blend) bristle
brush, roller, or airless sprayer. Follow manufacturer's
instructions when using spray equipment. For airless
spraying use a 0.015” to 0.017" tip at 1500 to 2000 psi. Wear
NIOSH approved respirator and provide adequate
ventilation.
TINTING
FastPrime Oil-Base may be tinted with up to 2 ounces of
universal colorant per gallon. Tinting the primer toward the
color of the topcoat helps hide in one coat. Shake or stir well
before using.
DRY TIME
Dries to the touch in 40 minutes and can be sanded or
recoated after 2 hours. Lower temperatures, higher humidity,
and the addition of tint will prolong dry and cure time. Allow
more time at cooler temperatures.
CLEAN-UP
Clean application tools immediately after use with paint
thinner (mineral spirits). Wipe up splatters before they dry.
Follow equipment manufacturer’s directions to clean spray
equipment. Dispose of unused or unwanted product in
accordance with local laws regulating solvent-based
coatings.