Technical Specifications

Typical Physical Properties
Solids by weight 12.5%
Solids by volume 7.8%
Density 0.748
Viscosity range <50 cps
Max. VOC 59%
Flashpoint (Seta flash) <32
o
F (<0
o
C)
Dry time (recoat)
@70
o
F (21
o
C) & 50% RH 10 to 20 minutes
Shelf Life @ 75
o
F. (24
o
C) 36 months
Storage/Handling 40
o
to 80
o
F (4
o
to 27
o
C)
Coverage – Approximately 25 to 35 sq. ft. (2 to 3 m
2
) per
aerosol container. Coverage may vary depending upon surface
porosity and method of application.
Warranty
Bulls Eye Shellac is formulated to maintain rapid dry time and
maximum film hardness. This product will perform as claimed if
directions are followed. This dispenser is guaranteed to spray.
Directions are as complete as possible, but cannot encompass
all conditions, applications, techniques and/or surfaces that are
beyond our control. If you have a question, check with your
dealer or contact ZINSSER Co., Inc. Somerset, NJ. Warranty is
limited to replacement or refund value of product actually used
if such product proves defective within three years of
manufacture.
Precautions
DANGER: EXTREMELY FLAMMABLE. Contents under pressure.
Do not use in presence of open flame or spark. Do not place in
hot water or near radiators, stoves or other sources of heat. Do
not puncture or incinerate container or store at temperatures
over 50
o
C (120
o
F). Use Only With Adequate Ventilation. Avoid
breathing mist and vapors. Avoid contact with skin and eyes.
KEEP OUT OF REACH OF CHILDREN